Product ID:AI-1047 NICHROME-ALUMINUM COMPOSITE
MSDS Date:08/01/1991
FSC:3439
NIIN:01-381-5136
MSDS Number: BYFDC

MILLER THERMAL TECHNOLOGIES,INC.,ALLOYS INTL. DIV.

1901 ELLIS SCHOOL ROAD
BAYTOWN, TX 77521-1215
US

Emergency Phone: 713-426-5535

Info Phone: 713-426-5535

Cage: 06677

MILLER THERMAL TECHNOLOGIES,INC.,ALLOYS INTL. DIV.

BAYTOWN, TX 77521-1215 US

Telephone: 713-426-5535

Cage: 06677

NICKEL (SARA 313) (CERCLA)

CAS: 7440-02-0

RTECS: QR5950000

Fraction By Weight: 74%

OSHA PEL 1 MG/M3

ACGIH TLV: 1 MG/M3; 9495

CHROMIUM (SARA 313) (CERCLA)

CAS: 7440-47-3

RTECS: GB4200000

Fraction By Weight: 20 - 50%

OSHA PEL 1 MG/M3

ACGIH TLV: 0.5 MG/M3; 9495

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB

ALUMINUM (SARA 313)

CAS: 7429-90-5

RTECS: BD0330000

Fraction By Weight: 6%

OSHA PEL 15 MG/M3 DUST

ACGIH TLV: 10 MG/M3 DUST; 9495

NONE TO

RTECS: 9999999ZZ

Fraction By Weight: NONE

Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:NO
Health Hazards Acute and Chronic:INHAL:BRONCHITIS, SIDEROSIS;
CANCER-MAY BE CONNECTED TO PULMINARY FIBROSIS. EYE
CONTACT:MECHANICAL IRRITATION, CONJUNCTIVITIS.
Explanation of Carcinogenicity:CONTAINS NICKEL & CHROMIUM.
Effects of Overexposure:BRONCHITIS, SIDEROSIS, CANCER CONNECTED TO
PULMINARY FIBROSIS. MECHANICAL EYE IRRIT, CONJUNCTIVITIS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:EYE CONTACT:FLUSH IMMED W/LG AMTS OF WATER. EYELIDS SHOULD BE
HELD AWAY FROM EYEBALLS TO INSURE THOROUGH RINSING. DO NOT RUB
EYES. OBTAIN MED ATTN IF IRRIT STAYS. INHAL:REMOVE FROM EXPOSURE.
IF SUBJEC T IS NOT BREATHING FOLLOW STANDARD PROCEDURE. SKIN:REMOVE
FROM EXPOSURE. WASH SKIN W/SOAP/WATER. INGEST:NONE.

Extinguishing Media:DRY CHEMICAL, DRY SAND, GRAPHITE TO SMOTHER FIRE.
TYPE D.
Fire Fighting Procedures:USE WATER ONLY IN MIST/FOG APPLICATION TO
AVOID SPREADING POWDER/ACCUMULATED DUST IN SURROUNDING
AREAS.FIREFIGHTERS SHOULD WEAR SCBA & PROTECTIVE CLOTH(SUPPLEM)
Unusual Fire/Explosion Hazard:AVOID AIRBORNE DISPERSION OF ANY FINELY
DIVIDED POWDER IN ENCLSD INDUSTRIAL AREA TO REDUCE POT FOR DUST
IGN.RXS W/WATER,ALKALIS,ACIDS TO PRODUCE HYDROGEN.(SUPP)

Spill Release Procedures:AVOID AIRBORNE DUST GENERATION.WHERE POSSIBLE
USE VAC SUCTION TO CLEAN SPILL MATL.USE HIGH EFFICIENCY PARTICULATE
ARRESTING(HEPA)FILTER IF VAC EXHAU IS DISCHARGED INTO WORKPLACE.USE
DUST SUPPRESSANT W HERE SWEEPING NECESSARY.PERSONAL
SAFETY(SUPPLEME)

Handling and Storage Precautions:KEEP IN CLSD CNTNRS.DO NOT STORE NEAR
STRONG OXIDIZERS.DO NOT STORE IN AREAS PROTECTED BY AUTOMATIC
SPRINKLER.
Other Precautions:PROPER GROUDING OF EQPMT ESSENTIAL.USE NON-SPARKING
TOOLS.ALL ELECTRICAL EQPMT MUST BE EXPLO-PROOF.AVOID STATIC
BUILUP/DISCHARGE.HOWEVER PER WARNING LABEL SUBMITTED W/MSDS:AVOID
PROLONG SKIN CONTACT & INHALING DUST.MAY CAUSE ALLERGIC RX.

Respiratory Protection:USE NIOSH APPROVED DUST RESPIRATORS SELECTED
ACCORDING TO OSHA 29CFR 1910.134 WHERE AIRBORNE LEVELS OF MATLS
EXCEED THE RECOMMENDED EXPO LIMITS. NUISANCE DUST MASK, 3M TYPE
8710 OR EQUIVALENT.
Ventilation:MECHANICAL(GEN):EXPLO/PROOF.USE ADEQUATE VENTI IN ORDER TO
MAINTAIN AIRBORNE PARTICULATE LEVELS Protective Gloves:MUST BE CONDUCTIVE.
Eye Protection:SAF GLASSES OR GOGGLES.
Other Protective Equipment:DO NOT WEAR CONTACT LENSES.HAVE EYE BATHS
READILY AVAILABLE WHERE EYE CONTACT CAN OCCUR.WORK CLOTHES.
Work Hygienic Practices:WASH HANDS AFTER HANDLING.USE GOOD HOUSEKEEPING
PRACTICES TO PREVENT ACCUMULATION OF DUST. NO SMOKING IN WORKAREA.
Supplemental Safety and Health
FIREFIGHTING:EQPMT.COVER TO ELIMINATE OXYGEN. FIRE/EXPLO HAZ:DUST/AIR
MIXTURE MAY EXPLODE VIOLENTLY WHEN IGN.HIGH HEAT OF FIRE MAY CAUSE
UNDERLYING CONCRETE TO FRACTURE. SPILL:RECOMMENDATION DESCRIBED
ELSEWHERE ON MSDS APPLY TO EXPO DURINGSPILL CLEANUP PROCEDURES.USE
NON-SPARKING CONDUCTIVE TOOLS.AVOID DUST CLOUDS.

HCC:N1
Spec Gravity:8.41
Solubility in Water:INSOLUBLE.
Appearance and Odor:LIGHT TO DARK GRAY COLOR, FINE POWDER, NO ODOR.

Stability Indicator/Materials to Avoid:YES
PURE OXYGEN OR OTHER STRONG OXIDIZERS, WATER, ACIDS, ALKALIS,
HALOGENATED HYDROCARBONS.
Stability Condition to Avoid:GENERATION OF AIRBORNE DUST.
Hazardous Decomposition Products:NONE SPECIFIED BY MANUFACTURER.

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH LOCAL, STATE AND
FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.